For more information call USAFD: Office hours 9:00 am - 5:00 pm 1-406-543-3900 (Ryan) and after hours and on the weekends 1-406-728-3939 (Isaac)
| Diesel MPG-MAX?![]() New from Snow Performance is the only system proven to increase fuel economy in all load states ?? empty or while towing. Special mapping and the most sophisticated 2d digital controller available result in 1-3 MPG increases! The MPG-MAX? system does not require a sustained high load state in order to provide maximum fuel economy gains. The MPG-MAX? system uses a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve, at anything over normal cruising boost. This provides an increase in combustion efficiency which provides more power without injecting more diesel fuel. This increase in efficiency translates into an increase in fuel economy. Typical fuel economy increases are 10%-15% or 1-3 MPG.
The MPG-MAX? system has a secondary output that is used to activate a Power Mode. The more sophisticated microprocessor introduces a independently mapped second stage of injection. A larger nozzle is used to inject more fluid to make more power. The Power Mode activation point is adjustable for best performance. The net effect is smooth power in all engine load states with no combustion quench resulting in a true turn-on-and-forget system.
It also now has a brighter Green LCD screen that displays boost, EGTs, and injection pump output. This means a savings of $200-$300 in gauges you don??t have to buy.
? Will not adversely affect particulate matter filter like most other power adders
? Doesn??t leave a ??signature? on vehicles computer so warranty isn??t jeopardized
? Comes complete with large 7 gal. reservoir for a truly complete system
? The most advanced system on the market ?? true 2d mapping and 2 nozzles controlled independently for smooth power ?? always
? The only system proven to improve fuel economy
? Provides better fuel economy (1-3 MPG), more power (50-100 HP), and lower EGTs (150?ψ-300?ψ F)
? Dash mounted module ?? displays real time ?? no need for gauges
Diesel Stage 3 MPG-MAX Boost Cooler upgrades are now available for customers with existing systems. The 7 Gallon Reservoir (#40016) is recommended if a larger reservoir isn't already being used. Please see product listing (#60005) and pricing below.
|
|
What kind of frequently asked questions would you like to view?![]() | ![]() | 1. What are the benefits of Water/Methanol injection?1. Greatly reduced EGTs - Decreases of 250 degrees F are common using a 50/50 water/methanol mix. Increased EGTs are an engine killer in today's performance diesel world.
2. Low cost power - Where else can you get 50-100 HP for as low as $549? What other modification does all these things with one system?
3. Greatly increased air charge densities - 3-5 psi boost increases are common with liquid intercooling.
4. Decreased emissions - increased combustion efficiency means less particulate matter and NOX emissions.
5. Fuel economy increase - increase your fuel economy up to 10%-15% (1-3 mpg).
6. Great for towing - more power/cooler EGT's to haul the heaviest loads.
2. Why is Water/Methanol injection so effective on Diesels?Unlike gasoline engines, the power in a turbo diesel is largely a function of fuel. The problem with continually adding fuel is that you create an over-fueling condition and reach a point where the exhaust gas temperatures become prohibitive (over 1300 degrees F). A 50/50 water/methanol mix will decrease EGT's approximately 200-300 degrees F while increasing power 50-100HP.
Power is increased through:
? Air charge cooling - Water/methanol usually lowers air charge temps over 200 degrees F. Low air temps makes denser air charge which provides more molecules of oxygen for combustion.
? Combustion conditioning - the methanol acts as a combustion catalyst as well as a cooling agent. Water vaporization inside the combustion chamber increases torque and power output through "the steam engine" effect.
Where else can you get this kind of power with cooler EGT's, reduced emissions, and more fuel economy?
3. Is this technology new with Turbo Diesel?Water/methanol injection has been used extensively for years in high performance truck/tractor pullers. With the elevated boost levels required for peak power, water/methanol is a common means of cooling the intake charge and reducing exhaust gas temps. Also, truckers have used water injection for years to inc |
|
 |
|
|
|
|
|
