8 New Bosch Dragon Fly Nozzle 2004.5---2006 LLY Chevy/GMC Duramax 50hp 24 LPM 15% Over Stock
Thease injectors with My 42% cp3 pump with EFI live tuning will do 625hp to the ground.
With stock Injectors and stock CP3 pump to the ground with EFI LIVE 390HP.
Note: you can run STOCK CP3 BUT BEST POWER IS WITH UPGRADED CP3 PUMP OR TWIN CP3 PUMPS!!
2004.5-05 LLY Dual CP3 kit ONLY NO PUMP!!
NOTE: The new Bosh nozzles will work on Re-man and New duarmax Injector bodies!
Contact us: 406-543-3900 or 406-728-3939
These will fit all style injector for your 2004.5 to early 2006 motor with LLY Motors only 6.6L Duramax truck. This is a complete kit that includes the nozzle install tool, 8 nozzles, and 8 copper o-rings.
-Great addition to go along with our BAG O PARTS OR II 33% CP3 PUMP for the 6.6l Duramax.
-Maximizes your fuel more efficiently, better atomization
-Great for the daily driver looking to increase mileage and bottom end performance for towing.
-Can be used with stock injection pump, but the bag o parts makes a great addition along with the extra 50hp injector nozzles.
-Extrude Honed Balanced matched for best results
-Great performance for up to 600hp
Contact us: 406-543-3900 or 406-728-3939 Ryan or Isaac
No other upgrade on a Duramx Common Rail Truck can provide the stump pulling torque that a set of Industrial Injection injector nozzles can. Some of the electronic boxes available today can actually crack your injectors, causing thousands of dollars in repair bills. Be confident that you have a mechanical change that will add reliable power, without the headaches. If reduced smoke, more power, and better mileage are what youre after, then you have come to the right place.
These nozzles will give you 125 horsepower at the wheels. Great power and okay fuel mileage. Not recommended for trucks still under warranty.
Mileage on your truck should stay about the same. Please wait a while to determine how your mileage has been affected. Your driving style has much to do with your mileage and that can be affected drastically by an excited driver.
Included with your nozzles is a nozzle removal tool to help you change the nozzles. This tool gets clamped in a vise and holds the injector so you can easily remove the nozzle.