8 New Bosch R4 Nozzles 2004.5-2006 LLY GMC/Chevy Duramax Diesels Dragonflow R Seriez 250hp 32 LPM 50% Over Stock
These injectors with My 120% cp3 pump with EFI live tuning will do 900hp+ to the ground.
With stock Injectors and stock CP3 pump to the ground with EFI LIVE 390HP.
Note: you can run STOCK CP3 BUT BEST POWER IS WITH UPGRADED CP3 PUMP OR TWIN CP3 PUMPS!!
NOTE: The new Bosh nozzles will work on Re-man and New duarmax Injector bodies!
Contact us: 406-543-3900 or 406-728-3939
These will fit all style injector for your 2004.5 to early 2006 motor with LLY Motors only 6.6L Duramax truck. This is a complete kit that includes the nozzle install tool, 8 nozzles, and 8 copper o-rings.
-Great addition to go along with our 85% Dragon Fire CP3 PUMP OR TWIN CP3 KITS for the 6.6l Duramax.
-Maximizes your fuel more efficiently, better automization
-Great for street and track but a little big for towing and not the best fuel mileage.
-Can not be used with stock pump must have at least a 85% or twin cp3 pumps in your truck
-Extrude Honed Balanced matched for best results
-Great performance for up to 950+hp
Contact us: 406-543-3900 or 406-728-3939 Ryan or Isaac
No other upgrade on a Duramx Common Rail Truck can provide the stump pulling torque that a set of Industrial Injection injector nozzles can. Some of the electronic boxes available today can actually crack your injectors, causing thousands of dollars in repair bills. Be confident that you have a mechanical change that will add reliable power, without the headaches. If reduced smoke, more power, and better mileage are what youre after, then you have come to the right place.
These nozzles will give you 230-260 horsepower at the wheels. Great power increase but not very good fuel economy. Not recommended for trucks still under warranty.
Mileage on your truck will not be the best with these injectors. Please wait a while to determine how your mileage has been affected. Your driving style has much to do with your mileage and that can be affected drastically by an excited driver.
Included with your nozzles is a nozzle removal tool to help you change the nozzles. This tool gets clamped in a vise and holds the injector so you can easily remove the nozzle.
