PHATSHAFT 62/80 350-550 HP With 14cm Exhaust housing For cooler EGT's
Application: 2004.5-2007 Dodge Cummins Diesel 24 valave 325HP Trucks
Installers Notes: You will not need to buy a down pipe with this turbo. This system will bolt directly to your factory exhaust flange
Contact us for more info or for package deals: 406-543-3900 OR 406-728-3939 Ryan or Isaac USAFD
2004.5-07 DODGE PHATSHAFT 62/80 350-600HP
The original PhatShaft is the perfect replacement turbo for towing. The PhatShaft can be purchased with a 12 or 14 turbine housing matched with a 65mm turbine. We suggest a 12 cm turbine housing if the truck is a 12 Valve and has moderate fueling upgrades such as 300hp injectors and a camplate. If the truck has heavier fueling upgrades such as aggressive fueling electronics, large injectors, aggressive camplate and high rev governor springs then you will be better suited with 14cm housing. The benefit of the 14cm exhaust housing is lower Exhaust Gas Temperatures however, response will be slower in daily driving situations. The original PhatShaft is available in three different compressor sizes, 62mm, 64mm and 66mm. All three compressors have extended tip technology. The wategate is set at 40psi to prevent head gasket failure on the PhatShaft 62 and 45psi on the PhatShaft 64 and 66. All PhatShaft turbochargers are equipped with dual grooved bearings and an adjustable boost elbow. The original PhatShaft compliments moderate fueling upgrades and can support 300 - 550hp.
The PhatShaft 62 is the perfect replacement turbo for towing. The PhatShaft 62 can be purchased with a 12 or 14 turbine housing matched with a 65mm turbine. The benefit of the 14cm over the 12cm exhaust housing is lower Exhaust Gas Temperatures but it will be slower to spool in daily driving situations. The wategate is set at 40psi to prevent head gasket failure. The PhatShaft 62 compliments moderate fueling upgrades and can support 300 - 550hp.
Part #: PS6280CRL