406-543-3900

0 item(s) in cart/Total: $0
Home > Dodge Cummins > Turbos > Industrial Injection Turbos

Dodge Diesel Truck Industrial Injection 04.5-07 Silver Bullet Turbo 62/80 650HP

Part Number 3032
review 0 Review(s)
0
Dodge Diesel Truck Industrial Injection 04.5-07 Silver Bullet Turbo 62/80 650HP
Dodge Diesel Truck Industrial Injection 04.5-07 Silver Bullet Turbo 62/80 650HP
Email a friend Email a friend
Review this item Review this item
Price
Your Price:  
$1,795.00
Availability:
In Stock.
Quantity
Add to Gift Registry
Description

2004.5-2007 5.9L Cummins 325HP SILVER BULLET 62/80 350-650HP

Seller's notes: I ran this turbo on my 2004.5 Dodge Cummins 325HP and it was a breeze to install and the best turbo I've ever run period for the Cummins Commin rail diesel truck. We still use this truck every day for pulling up to 20k + pounds with ease And still makes 20 MPG not loaded on the hyway. This turbo also keaps are EGTS at the Lowest possible point.

The combo on the truck I mentioned above is: Silver 62, 100hp USAFD Injectors, 5" Stainless magnaflow Exhaust, CFM+ Intake Manifold, AFE Mega Cannon Intake filter kit, Smarty Tuner Works the best on it all though I've used other brands, and Last but not least Fass Fuel 150gph fuel system. This makes bout 600+hp

One of the best combos is: Silver Bullet 66/80 Smarty Pod, 5" Exhaust, AFE OR S&B Air Intake, CFM+ intake manifold, 100HP USAFD Injectors, And Industial Injection 33% or 85% Cp3 Pump. This combo will put you at the 675-750HP Range. I have all these items in stock and in my store. Alos let me know if you want a package deal via my contact info below!

If you are not doing heavy towing and are going all out performance I would highly recamend the Silver Bullet 66/80 good for over 800+hp I also have this availble in my ebay store!

Contact us: 406-543-3900 & USAFD

Installer's Notes: This Turbo will fit directly to your factory exhaust! So you will not need to buy a down pipe!

The Silver Series PhatShaft is our latest effort to achieve perfection. Much like the Super PhatShaft it was designed to handle multiple fueling upgrades and comes in three sizes 62mm 64mm, and 66mm. What separates the Silver Series PhatShaft from the Super PhatShaft is our new technology 74mm turbine wheel. To improve on the Super PhatShaft turbos we needed improve performance at a lower rpm range and we needed to reduce compressor surge. The solution is the 74mm turbine which is the latest in turbine trim design technology. The new trim design transfers exhaust gas energy more efficiently than any other turbine on the market. It also allows for better exhaust gas expulsion which results in lower EGT??s and quicker rotor acceleration. The most important benefit of the 74 mm turbine wheel is that it gets rid of turbo surge and broadens the power range. All silver series turbo come with a 360 degree thrust bearing and an appealing polished compressor housing. The Silver series utilizes the proven 14cm exhaust housing with a modified exhaust nozzle. We maximize the wastegate ports in the 14cm housing by enlarging the diameter. The turbine housing wastegate cover it custom build to allow full wastegate travel. Like all PhatShaft turbochargers they are equipped with dual grooved high performance bearings and an adjustable boost elbow. Our Sliver series turbochargers have been proven to support up to 800hp and are the best turbochargers on the market today.

62

The Silver 62 is our latest effort to balance the demands of towing and performance with a single turbocharger. It is designed to handle one or more fueling upgrades. It comes equipped with an extended tip 62mm compressor wheel. What separates the Silver 62 from the Super PhatShaft 62 is the 74mm turbine wheel. It??s outfitted with a polished compressor housing and 360 degree thrust bearing. The Silver 62 uses a 14 cm exhaust housing in which we modify the angle of the exhaust nozzle, maximize the wastegate ports, and enlarge the wastegate chamber for full wastegate travel. Like all PhatShaft turbochargers it is equipped with dual grooved high performance bearings and an adjustable boost elbow. The Sliver 62 can support up to 650hp and is the best all-round turbo on the market today.

Retail Price :$1,795.00

Part #: SBPS6480CRL
No core charge: 0.00

Related Items
STAINLESS EXHAUST TIP 4
STAINLESS EXHAUST TIP 4"" TO 5"" BOLT ON SLANT CUT FORD DODGE CHEVY 12"" LONG
Average Rating 0 Review(s)
Your Price: $59.00
Valair 10.5
Valair 10.5"" Triple Disc 1300hp Clutch Dodge Cummins NV5600 6 Speed 2000-2005
Average Rating 0 Review(s)
Your Price: $2,500.00
Valair Heavy Duty Pilot Bearing For NV4500 5 Speed With Stock Flywheel
Valair Heavy Duty Pilot Bearing For NV4500 5 Speed With Stock Flywheel
Average Rating 0 Review(s)
Your Price: $25.00
Valair SFI Flywheel Triple Disc 1000hp Clutch Dodge Cummins NV5600 6 Speed 00-05
Valair SFI Flywheel Triple Disc 1000hp Clutch Dodge Cummins NV5600 6 Speed 00-05
Average Rating 0 Review(s)
Your Price: $2,725.00
Magnaflow 1999-2003 Ford 7.3L Powerstroke Diesel 4
Magnaflow 1999-2003 Ford 7.3L Powerstroke Diesel 4"" Turbo Back Exhaust W Muffler
Average Rating 0 Review(s)
Your Price: $360.11
Magnaflow 1999-2003 Ford 7.3L Diesel Truck 4
Magnaflow 1999-2003 Ford 7.3L Diesel Truck 4"" Turbo Back Dual Exhaust No Muffler
Average Rating 0 Review(s)
Your Price: $481.56