FASS FUEL SYSTEM FORD POWERSTROKE DIESEL 2005-2007 6.0L
Contact us: 406-543-3900 or after hours and weekends 406-728-3939
FASS Titanium Series Fuel Systems
High Performance Fuel Pump
Water and Air Separators
Note: This system works in addition to the factory diaphragm.
If you want to replace the factory diaphragm pump then you will need part number
T F13 125G
2005-2007 Ford Powerstroke Diesel 4x4 6.0L
Alaska, Hawaii and International buyers please email for a shipping quote.
Product #T F11 095G
Stock to Moderate
Titanium Series (95 Series)
95 GPH - 17 psi
95 Size Filters (shorter size)
95 size filters are shorter and may need to be replaced more often. They are shorter for clearance and are less visible under the truck
150 size filters are longer and can go longer than the 95 size filters without being replaced. They will most likely be visible from under the truck.
Real World Conditions - In the real world, the fuel tanks are usually mounted at least two (2) feet below and ten (10) feet away from the fuel pump, This configuration creates multiple problems associated with the fuel delivery to the engine. First, the injection pump has to draw the fuel from the tank by creating a vacuum. When diesel fuel is drawn by a vacuum fuel vapor is produced. Second, while the vehicle is underway the fuel is sloshing around in the fuel tanks creating entrained air. This circumstance has created a situation far from the test cell conditions which results in air and vapor being mixed in with the fuel when it is delivered to the injector. By having entrained air and air vapor in the fuel the engine does not perform at the engine manufacturer's specification. Air and fuel vapor occupy the space that should have pure fuel, thus delaying the injection of fuel into the combustion chamber. This phenomenon is better known as "RETARDED TIMING." The air/vapor present in fuel is very inconsistent making it virtually impossible to adapt the varying degrees of changes in injection timing. The retarded injections cause a multitude of problems in the combustion chamber!
FASS Pre-Filter Notice
When the water separator of the FASS Fuel System or the strainer for the HPFP's is replaced, make sure to replace it with an element consisting of a 144 micron wire mesh material. We use a stainless steel wire mesh element to pre-filter, resulting with much less restriction than a paper element.
We are finding many technical calls relating to restriction issues cause by the use of improper materials on the suctions side.
FASS is pleased to share with you the same confidence that we have in our product. That is to say, when you buy a FASS or HPFP we are so sure that it is the best quality you can buy that weƒ??re going to give you a LIFETIME WARRANTY (on selected part numbers). On your select model of FASS and HPFP, you can drive off with that feeling of security