Dragon Fly 60hp 2004.5-2007 5.9L 325HP Nozzles (new style)... NOTE: The new style Bosh nozzles will work on OLD AND NEW STYLE Injector bodies!... Contact us: 406-543-3900 or 406-728-3939... These will fit the old & new style injector for your 2004.5-07...
Dragon Fly 60hp 2004.5-2007 5.9L 325HP Nozzles (new style)
NOTE: The new style Bosh nozzles will work on OLD AND NEW STYLE Injector bodies!
Contact us: 406-543-3900 or 406-728-3939
These will fit the old & new style injector for your 2004.5-07 5.9L truck. It matches nozzles number 1659 & nozzles number 5500 . This is a complete kit that includes the nozzle install tool, 6 nozzles, and 6 copper o-rings.
-Great addition to go along with our BAG O PARTS OR II 33% CP3 PUMP for the 5.9L dodge.
-Maximizes your fuel more efficiently, better atomization
-Great for the daily driver looking to increase mileage and bottom end performance for towing.
-Can be used with stock injection pump, but the bag o parts makes a great addition along with the extra 60hp injector nozzles.
-Extrude Honed Balanced matched for best results
-Great performance for up to 600hp
No other upgrade on a Dodge Common Rail can provide the stump pulling torque that a set of Industrial Injection injector nozzles can. Some of the electronic boxes available today can actually crack your injectors, causing thousands of dollars in repair bills. Be confident that you have a mechanical change that will add reliable power, without the headaches. If reduced smoke, more power, and better mileage are what youre after, then you have come to the right place.
These nozzles will give you 60+ horsepower at the wheels. Great power increase and good fuel mileage. Not recommended for trucks still under warranty.
Mileage on your truck should increase by about 1-3 mile per gallon. Please wait a while to determine how your mileage has been affected. Your driving style has much to do with your mileage and that can be affected drastically by an excited driver.
Included with your nozzles is a nozzle removal tool to help you change the nozzles. This tool gets clamped in a vise and holds the injector so you can easily remove the nozzle.